Page is not available.
Make sure your browser allows JavaScript execution.

Please wait for page to completely download

Series 35 Classic

DISCONTINUED MODEL
For new constructions, we recommend the technically improved e-chain® Series 3500 from the igus® E20000 product range.
Secure hold of the crossbars, improved opening principle, longer unsupported lengths, same dimensions

Series 35 is available from stock in limited numbers. Product support and storage are limited as of 2012. For questions, please refer to your igus® contact person. Thank you for your understanding
to the E20000 Serise 3500

Here you can configure your e-chain system® individually. All entries and changes are taking over to the part list which is situated at the end of the page.

Series 35 - Chain, openable along one side

1./2. Double stop-dog
3.Wide surface for cable
4.Skids
5.Solid pin
6.Openable crossbar (Series 35)

When to use Series 35

openable along one side
Can be combined with Series 30
Cable-friendly due to large load-bearing surfaces
Integrated, low-noise skids
High stability

When not to use Series 35

If each link should openable from both sides
System E4, Series 220, etc.
If maximum stability is required
System E4, Series 220, etc.
If swarf protection is required
energy tube E2, R48
For very easy applications
easy chain®, E200

Installation dimensions


Part No. :
Inner width Bi [mm]:
Bending radius R [mm]:
Travel distance S [mm]:
Fixed end dM [mm]:
Chain length^** [mm]:
Number of chain links :
External width Ba [mm]:
H^* [mm]:
D [mm]:
K [mm]:
K2 [mm]:
Hi [mm]:
Ha [mm]:
Weight per link [g]:
Weight [kg/m]:
* The required clearance height is HF = H + 40 mm (at 2.5 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.

A=Moving end, B=Fixed end
Pitch: 67mm
Chain links per m: 15
Travel: S
Chain length = S/2 + K

Unsupported length

The unsupported length versus fill weight
X axis: Unsupported length in m FLB/FLG
Y axis: Fill weight in kg/m
FLB = Unsupported with permissible sag
FLG = Unsupported with straight upper run

Price index:

Opening mechanism :

Personal contact

Application examples 3D-CAD Samples and catalog order E-Chain® Expert call Service life calculation PDF file Ask the product expert

Designing with igus®

Design specificationFurther information on "unsupported application"

Design specificationFurther information on "gliding application"

Assembly instructions

Other installation types

Technical specifications

Strain reliefs

Interior separation

Option 1. Separators

Option 2: Full-width shelves

Product range


unassembled	assembled
Per . chain link

Please use Configurator for partitioning of interior and for filling with cables.

Call configurator


Part No. :

Pc. Add to part list

Online Services:

The interior separation system of the series 30/35/36: Option 1 Separators:
Separators: can be used freely, can be moved

Separators are one way of dividing the interior of the openable chains of the type 35/36 (only option for Series 30 interior separation) and are primarily used for side-mounted chains.

Product range


unassembled	assembled
Per . chain link

Please use Configurator for partitioning of interior and for filling with cables.

Call configurator


Part No. :

Pc. Add to part list

Online Services:


Width [mm]:
Part No. :

Pc. Add to part list

Online Services:

Option 2: full-width shelves and separators

This option is only for the openable chains of type 35 / 36. This option is useful when using many small cables with similar diameters. This variant always takes up the entire inner width of the chain.

Mounting brackets

Option 1 Steel, one-piece

Option 2 Steel, two-piece

unassembled	assembled

Option 2: Steel, one-piece

Locking

For short and long travels

Fast assembly

Front attachment option


:
Part No. :
A [mm]:
B [mm]:
C [mm]:

unassembled	assembled

Option 1: Steel

One part for all chain widths

Electrically conductive

Twice the number of screws/holes

Variety of parts

Prefabrication is difficult


Part No. :
A [mm]:
B [mm]:
C [mm]:
D [mm]:

Guide troughs

Steel guide troughs

1. Guide trough (blue)
2. Glide bar (black)
3. Installation set (red)
4. Individual attachment without C-profile
5. Profile rail length

Guide troughs are used for applications where the upper run of the e-chain® glides on the lower run. When using the igus® guide trough made of steel, the following components are required. Guide trough without glide bars part no. 93.30, guide trough with glide bars part no. 93.31, assembly sets as butt connectors part no. 93.50. XX
.XX indicates the length of the C-profiles on which the guide trough will be mounted. The standard length of the trough parts and glide bars is 2m. The required length of guide trough is determined by the travel length.


Part No. :
A [mm]:
B [mm]:
C [mm]:
D [mm]:
E [mm]:
F [mm]:
G [mm]:
H [mm]:

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:

Design specificationFurther information on "gliding application"

+ Easy assembly using installation sets
+ two-part model – adjustable from chain width
+ Very strong
+ Cost-effective
+ Large selection

Guide trough without glide bars, Part No. 93.30, guide trough with glide bars Part No. 93.31

Installation sets, Part No. 93.50. XX

Part List

Personal contact

GToB Imprint General notes Data protection declaration

Material of chain links	igumid G
Min. permissible temperature [°C]	-40
Max. permissible temperature [°C]	120
Gliding speed (max.) [m/s]	10
Max. gliding speed [m/s²]	50
Speed FLG max. [m/s]	20
Speed FLG max. [m/s²]	200
Speed FLB max. [m/s]	3
Speed FLB max. [m/s²]	6
Flammability class of chain link	VDE 0304 IIC UL94 HB

Series 35 Classic

Series 35 - Chain, openable along one side

Installation dimensions

Unsupported length

Long travels

Other installation types

Technical specifications

Interior separation

Product range

Product range

Mounting brackets

Guide troughs

Part List